Hand-Held Power Saws Syracuse NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Lowe's
(315) 652-1200
3856 State Route 31
Liverpool, NY
Gravina Gardens & Ace Hardware
(315) 457-8585
4850 Buckley Rd
Liverpool, NY
Valu Home Center #51
315-452-6822
3803 North Brewerton Rd
North Syracuse, NY
The Home Depot
(315)449-2920
5814 Bridge St
East Syracuse, NY
Kmart 3115 / Cross Merch
(315) 445-1904
3469 Erie Blvd E
De Witt, NY
Village Ace Hardware
(315) 637-7696
204 S Manlius St
Fayetteville, NY
T&K Lumber Co, Inc.
315-689-3005
170 Route 5 West Elbridge, NY, 13060
Elbridge, NY
Valu Home Center #52
315-414-0186
123 Shop City Plaza
Syracuse, NY
Valu Home Centers
315-471-1280
4671 Onandaga Blvd
Syracuse, NY
Kmart 4034 / Cross Merch
(315) 455-7393
2803 Brewerton Rd
Mattydale, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction

Related Articles
- Finishing Concrete Syracuse NY
Power floating embeds the large aggregate just beneath the surface of the mortar, removes surface irregularities, and compacts the concrete while it consolidates mortar at the surface in preparation for other finishing operations. The timing of when you should power float a floor is critical. The rule of thumb on when a slab is ready for the power float is that your footprint should only be 1/4-inch deep or less, with little or no bleed- water present.
- Generators, Compressors and Saws Syracuse NY
- Environmentally Friendly Oils Syracuse NY
- Drape Wall and Cloak Wall Syracuse NY
- How to Choose a Grout Vibrator Syracuse NY
- Innovative Products for Home Remodeling Projects Syracuse NY
- Hand Tools Syracuse NY
- Home Repair Tools Syracuse NY
- Home Improvement Product Reviews Syracuse NY