Hand-Held Power Saws Oswego NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Raby's Ace Home Center
(315) 342-9663
247 Washington Blvd
Oswego, NY
Brewerton Building Supply
(315) 676-2300
46 Corporate Park Dr
Central Square, NY
Burkes Do it Best Home Center
315-343-6147
38 East Second Street
Oswego, NY
Kmart 7451 / Cross Merch
(315) 598-9641
2078 State Rte 481
Fulton, NY
Water Heater Warranty Svce
(516) 248-6857
370 Old Country Rd
Garden City, NY
Ty It Together
315-402-5655
91 East 4th Street
Oswego, NY
Fastenal- Fulton
315-593-6445
366 W. 1st St South Fulton, NY, 13069
Fulton, NY
Burke's Home Center
315-592-2244
65 North Second Street
Fulton, NY
Lowe's
(315) 326-5030
445 State Route 104
Oswego, NY
Cloonan's Air-Cooled Engines
(315) 343-3104
Hall Rd
Oswego, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction