Hand-Held Power Saws Lockport NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Rockler Woodworking and Hardware #11
(716) 631-8922
5085 Transit Rd
Buffalo, NY
TOOL RANCH
3857 WALDEN AVENUE LANCASTER, NY, 14086
Lancaster, NY
Valu Home Center #23
716-694-7887
1365 Nash Road
North Tonawanda, NY
Valu Home Center #31
716-835-0677
396 Kenmore Ave
Buffalo, NY
The Home Depot
(716)439-4898
5730 S Transit Rd
Lockport, NY
RC Tonewoods
716-873-6043
1109 Military Road
Buffalo, NY
Fastenal-Lockport
716-434-9041
5901 S. Transit Rd Lockport, NY, 14094
Lockport, NY
Newfane Lumber & Mfg Co Inc
716-434-5577
554 Ohio Street
Lockport, NY
Hectors Snyder Associates Inc
716-834-7412
3875 Harlem Road
Snyder, NY
The Home Depot
(716)895-6680
300 Thruway Plaza Dr
Cheektowaga, NY
Data Provided by:
  

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction

Related Articles
- Finishing Concrete Lockport NY
Power floating embeds the large aggregate just beneath the surface of the mortar, removes surface irregularities, and compacts the concrete while it consolidates mortar at the surface in preparation for other finishing operations. The timing of when you should power float a floor is critical. The rule of thumb on when a slab is ready for the power float is that your footprint should only be 1/4-inch deep or less, with little or no bleed- water present.
- Hand Tools Lockport NY
- Home Repair Tools Lockport NY
- Environmentally Friendly Oils Lockport NY
- How to Choose a Grout Vibrator Lockport NY
- Innovative Products for Home Remodeling Projects Lockport NY
- Home Improvement Product Reviews Lockport NY
- Drape Wall and Cloak Wall Lockport NY
- Generators, Compressors and Saws Lockport NY