Hand-Held Power Saws Ithaca NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Fastenal- Ithaca
607-277-8379
229 Cherry St Ithaca, NY, 14850
Ithaca, NY
Ag Trac Llc
315-497-1650
1044 State Route 34
Genoa, NY
Stover Lumber Inc.
607-387-3188
1974 Trumansburg
Jacksonville, NY
The Home Depot
(607)272-1093
410 Elmira Road Bldg 1
Ithaca, NY
Pyramid Mall
(607) 266-6100
40 Catherwood Rd
Ithaca, NY
Lowe's
(607) 254-2000
130 Fairgrounds Memorial Parkway
Ithaca, NY
Builders Best Do it center
607-756-7871
3798 Luker Road
Cortland, NY
Alpine Building Supply
315-497-1221
Route 38
Moravia, NY
Cayuga True Value Lumber
(607) 273-0245
801 W State St
Ithaca, NY
Cortland - D
(607) 753-9663
854 State Rte 13
Cortland, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction