Hand-Held Power Saws Hollis NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Fastenal- Mineola
516-294-7132
315-B Roslyn Road Mineola, NY, 11501
Mineola, NY
Morales Home Center Express
718-665-8380
2800 Third Ave
Bronx, NY
Bruno's Hardware
718-858-5250
95 Court St
Brooklyn, NY
The Home Depot
(718)828-1071
2560 Bruckner Blvd
Bronx, NY
The Home Depot
(516)364-4677
111 Jericho Turnpike
Syosset, NY
Monster Woodshop
888-506-6678
607 18th Street
Brooklyn, NY
City Paint & Ace Hardware
(201) 659-0061
130 Washington St
Hoboken, NJ
Schall Paint & Hardware
914-965-3339
311 Saw Mill River Rd
Yonkers, NY
Active Lumber
718-492-5000
6119 7th Avenue
Brooklyn, NY
The Home Depot
(718)333-9850
2970 Cropsey Avenue
Brooklyn, NY
Data Provided by:
  

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction

Related Articles
- Finishing Concrete Hollis NY
Power floating embeds the large aggregate just beneath the surface of the mortar, removes surface irregularities, and compacts the concrete while it consolidates mortar at the surface in preparation for other finishing operations. The timing of when you should power float a floor is critical. The rule of thumb on when a slab is ready for the power float is that your footprint should only be 1/4-inch deep or less, with little or no bleed- water present.
- Home Improvement Product Reviews Hollis NY
- Innovative Products for Home Remodeling Projects Hollis NY
- Generators, Compressors and Saws Hollis NY
- Drape Wall and Cloak Wall Hollis NY
- Environmentally Friendly Oils Hollis NY
- Hand Tools Hollis NY
- Home Repair Tools Hollis NY
- How to Choose a Grout Vibrator Hollis NY