Hand-Held Power Saws Glens Falls NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Ron's Hardware Inc
(518) 644-9600
4979 Lake Shore Dr
Bolton Landing, NY
LOWE'S OF GLENS FALLS, N. Y.
518 798-9050
251 QUAKER RD. QUEENSBURY, NY, 12804
Queensbury, NY
Walker's Farm, Home & Tack
518-639-5223
5565 State Route 4
Fort Ann, NY
Lowe's
(518) 798-9050
251 Quaker Road
Queensbury, NY
Kmart 4928 / Cross Merch
(518) 743-0290
308 Dix Avenue
Queensbury, NY
Noble Ace Hardware
(518) 761-6777
80 William St, Hannaford on Rte. 9
South Glens Falls, NY
Fastenal- Queensbury
518-793-3333
17 Boulevard Queensbury, NY, 12804
Queensbury, NY
LOWE'S OF SARATOGA SPRINGS, NY
518 583-3777
10 LOWE'S DRIVE SARATOGA SPRINGS, NY, 12866
Saratoga Springs, NY
The Home Depot
(518)798-8301
820 Route 9
Queensbury, NY
Wilton Mall
(518) 583-8500
3065 Route 50
Saratoga Spgs, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction

Related Articles
- Finishing Concrete Glens Falls NY
Power floating embeds the large aggregate just beneath the surface of the mortar, removes surface irregularities, and compacts the concrete while it consolidates mortar at the surface in preparation for other finishing operations. The timing of when you should power float a floor is critical. The rule of thumb on when a slab is ready for the power float is that your footprint should only be 1/4-inch deep or less, with little or no bleed- water present.
- Environmentally Friendly Oils Glens Falls NY
- Innovative Products for Home Remodeling Projects Glens Falls NY
- Generators, Compressors and Saws Glens Falls NY
- Home Repair Tools Glens Falls NY
- Hand Tools Glens Falls NY
- How to Choose a Grout Vibrator Glens Falls NY
- Drape Wall and Cloak Wall Glens Falls NY
- Home Improvement Product Reviews Glens Falls NY