Hand-Held Power Saws Corning NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Lowe's
(607) 739-6106
913 County Rd., Route 64
Elmira, NY
LOWE'S OF BIG FLATS, N.Y.
607 739-6106
913 COUNTY RD, RT 64 ELMIRA, NY, 14903
Elmira, NY
The Corning Building Co
607-936-9921
Cbc Plaza, Park Ave
Corning, NY
Morgan & Margraff Lbr.supp.co.
814-258-5223
Condensary Lane
Elkland, PA
The Home Depot
(607)936-1400
3160 Silverback Lane
Painted Post, NY
Garreson Lumber Company
607-566-8558
7201 Craig Rd.
Bath, NY
Fastenal- Elmira
607-737-9062
1336 College Ave Elmira, NY, 14901
Elmira, NY
Wades Building Supply Inc.
607-359-2466
2 Wall Street
Addison, NY
Horseheads Do it center
607-739-5616
124 North Main Street
Horseheads, NY
Hall's Lumber & Hardware
570-827-2127
18759 Rt 287
Tioga, PA
Data Provided by:
  

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction

Related Articles
- Finishing Concrete Corning NY
Power floating embeds the large aggregate just beneath the surface of the mortar, removes surface irregularities, and compacts the concrete while it consolidates mortar at the surface in preparation for other finishing operations. The timing of when you should power float a floor is critical. The rule of thumb on when a slab is ready for the power float is that your footprint should only be 1/4-inch deep or less, with little or no bleed- water present.
- How to Choose a Grout Vibrator Corning NY
- Innovative Products for Home Remodeling Projects Corning NY
- Home Improvement Product Reviews Corning NY
- Drape Wall and Cloak Wall Corning NY
- Hand Tools Corning NY
- Environmentally Friendly Oils Corning NY
- Generators, Compressors and Saws Corning NY
- Home Repair Tools Corning NY