Hand-Held Power Saws Coram NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Oakdale Paint & Hardware
(631) 567-9705
1460 Montauk Hwy
Oakdale, NY
The Home Depot
(631)451-0685
346 Middle Country Rd
Coram, NY
Lowe's
(631) 687-6220
825 Montauk Highway
East Patchogue, NY
Smith-Haven Mall
(631) 361-5259
4 Smith Haven Mall
Lake Grove, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Northport Hardware Company
631-261-4449
90 Main Street
Northport, NY
The Home Depot
(631)284-2530
1550 Old Country Road
Riverhead, NY
5137 Nesconset Hwy
(631) 476-0438
Rr 347
Pt Jefferson, NY
Data Provided by:
  

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction

Related Articles
- Finishing Concrete Coram NY
Power floating embeds the large aggregate just beneath the surface of the mortar, removes surface irregularities, and compacts the concrete while it consolidates mortar at the surface in preparation for other finishing operations. The timing of when you should power float a floor is critical. The rule of thumb on when a slab is ready for the power float is that your footprint should only be 1/4-inch deep or less, with little or no bleed- water present.
- Environmentally Friendly Oils Coram NY
- Innovative Products for Home Remodeling Projects Coram NY
- Generators, Compressors and Saws Coram NY
- Home Improvement Product Reviews Coram NY
- Hand Tools Coram NY
- Drape Wall and Cloak Wall Coram NY
- Home Repair Tools Coram NY
- How to Choose a Grout Vibrator Coram NY