Hand-Held Power Saws Auburn NY

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp.

Local Companies

Fastenal- Auburn
315-258-8054
360 Grant Ave Auburn, NY, 13021
Auburn, NY
Elbridge Ace Hardware
(315) 689-3218
237 E Main St, Big M Plaza
Elbridge, NY
Nightingale True Value Hdwe
(315) 673-2001
4068 South St
Marcellus, NY
The Home Depot
(315)484-7240
3756 Milton Avenue
Camillus, NY
Westvale Plz
(315) 488-1180
2214 W Genesse St
Syracuse, NY
Village Ace Hardware
(315) 834-2275
2701 Erie Dr
Weedsport, NY
T&K Lumber Co, Inc.
315-689-3005
170 Route 5 West Elbridge, NY, 13060
Elbridge, NY
Ag Trac Llc
315-497-1650
1044 State Route 34
Genoa, NY
Moravia True Value Hardware
(315) 497-1966
102 Main St
Moravia, NY
Fingerlakes Mall
(315) 258-6300
1579 Clark St
Auburn, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: February 1, 2007

By MASONRY CONSTRUCTION Staff

Reciprocating saw has ergonomic design

The WSR 1400-PE reciprocating saw features a smart power system that maintains blade speed under load and reduces cutting time. The saw is ergonomically designed with a vibration control, front hand grip, comfort side handle, and keyless blade clamp. The saw's orbital action is powered by a 13.5-amp motor with six speed settings.

Hilti Inc., 800-879-8000, www.us.hilti.com

Machine cuts deep into masonry

The TS 800 Cutquik cut-off machine works deep into masonry, stone, and steel. The user doesn't feel uncomfortable, fatiguing movement, even at 9000 rpm, due to the tool's five-point, dual element anti-vibration system. The machine comes with a specially-designed cart so it can do the work of walk-behind equipment for certain jobs.

Stihl Inc., 800-467-8445, www.stihlusa.com

Handheld tool makes square cut

The 603GC cut-off saw provides an alternative to other handheld masonry and concrete cutting tools. The saw is capable of plunge cutting to 10 in. and creates a square opening with no overcuts in material as thick as 9 in. The product has a rear port air intake and filtration system designed for wet cutting aggregate materials.

ICS Blount Inc., 800-321-1240, www.icsbestway.com

Dry-cut saw works in tight spots

The CM4SB2 4-in. masonry saw moves smoothly through tile, marble, granite, concrete brick, and similar materials. It withstands tough conditions in a dry-cutting environment. A specially-sealed armature and switch protect the tool from dust and debris and minimize vibration and noise. Its short edge-to-blade distance makes it easy to cut in tight spaces.

Hitachi Power Tools, 800-829-4752, www.hitachipowertools.com

Click here to read full article from Masonry Construction

Related Articles
- Finishing Concrete Auburn NY
Power floating embeds the large aggregate just beneath the surface of the mortar, removes surface irregularities, and compacts the concrete while it consolidates mortar at the surface in preparation for other finishing operations. The timing of when you should power float a floor is critical. The rule of thumb on when a slab is ready for the power float is that your footprint should only be 1/4-inch deep or less, with little or no bleed- water present.
- Home Improvement Product Reviews Auburn NY
- Hand Tools Auburn NY
- Generators, Compressors and Saws Auburn NY
- Innovative Products for Home Remodeling Projects Auburn NY
- Environmentally Friendly Oils Auburn NY
- How to Choose a Grout Vibrator Auburn NY
- Home Repair Tools Auburn NY
- Drape Wall and Cloak Wall Auburn NY