Green and Healthy Products Staten Island NY

Utilizing the soy-based PureBond adhesive resin, the manufacturer's veneer-core plywood and Woodstalk agrifiber-core panel products are formaldehyde-free and water-resistant.

Local Companies

G&L and Sons Renovations
153 Young Ave.
Cedar Grove, NJ
Merrick Construction, Inc.
524 Prospect Ave
Little Silver, NJ
Plants Le Bacle
33 East 60th Street Frnt
New York, NY
International Garden Inc
807 Avenue Of The Americ
New York, NY
Christopher Martin
MCM Furniture

48-17 69 Street
Woodside, NY
Gandalf Restorations
18 Henry St
Metuchen, NJ
SilverLining Interiors, Inc.
2091 Broadway, third floor
New York, NY
Parente Landscaping Corporation
12508 84th Road
Kew Gardens, NY
Smith & Hawken Inc
394 West Broadway
New York, NY
Lykos Stamatios P Landscapes Architect
366 West Broadway
New York, NY
Data Provided by:

Provided By:

Source: CUSTOM HOME Magazine
Publication date: July 1, 2006


Waste Not

Utilizing blast-furnace slag from iron manufacturing, NewCem hydraulic cement helps to achieve low permeability; improved workability; lower setting temperatures; and resistance to chemical reactions. Lafarge North America. 678.746.2000.

Fresh Air

Trane CleanEffects patented air-cleaning technology uses an intense electrical charge to remove up to 99.98 percent of particles from the air entering a home. Its reusable filter only needs cleaning every few months. The system's electrical use compares to that of a 75-watt light bulb, the manufacturer says. Trane. 903.581.3200.

Scrap Metals

Made from fine flake aluminum milling scrap and polymeric resins, Alkemi solid surfacing can be used for countertops and other surface applications. Alkemi can be cut, seamed, and machined like other solid-surfacing materials. Twelve colors are available in honed or textured finishes. Renewed Materials. 301.320.0042.

Cool Coating

The Tex-Cote Super-Cote Cool Wall system is a heat-reflective exterior coating that can reduce exterior wall temperatures by up to 40 degrees F, lowering interior temperatures. The finish, which is 10 times thicker than paint, is applied in a multi-step process with no need for scraping or sanding. Textured Coatings of America. 800.454.0340.



Click here to read full article from Architect Magazine

Related Articles