Great Industrial Gadgets Camillus NY

The connectors in Camillus, which fit any pneumatic tool with a standard thread, also provide about 15 degrees of lateral movement, meaning you can twist the nailer 15 degrees in any direction before you're actually tugging on the hose. The reduction in wrist and forearm fatigue alone is worth the price of the accessory.

Local Companies

Village Hardware
(315) 638-4026
43 E Genesee St
Baldwinsville, NY
Lowe's
(315) 350-2801
131 Simon Drive
Syracuse, NY
Tully Building Supply
315 696 8984
24 Onondaga St Tully, NY, 13159
Tully, NY
The Home Depot
(315)252-4540
1634 Clark Street Road
Auburn, NY
Kmart 3115 / Cross Merch
(315) 445-1904
3469 Erie Blvd E
De Witt, NY
Village Ace Hardware
(315) 834-2275
2701 Erie Dr
Weedsport, NY
Lowe's
(315) 652-1200
3856 State Route 31
Liverpool, NY
Fastenal- Syracuse
315-474-0970
920 Spencer Street Syracuse, NY, 13204
Syracuse, NY
Tully Do it Best Bldg Supply
315-696-8984
24 Onondaga Street
Tully, NY
Westvale Plz
(315) 488-1180
2214 W Genesse St
Syracuse, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By David R. Crosby and Bruce Guertin

Nailer Accessory

These swivel-action little gems make working with nailers easier than ever. The Industrial Ball Swivel Connectors replace the male coupling on your nailer, and their ability to swivel eliminates twisting and kinking in the air hose, so you can move around freely; in other words, the ball swivel joint keeps the gun hose from turning into a Slinky. The connectors, which fit any pneumatic tool with a standard thread, also provide about 15 degrees of lateral movement, meaning you can twist the nailer 15 degrees in any direction before you're actually tugging on the hose. The reduction in wrist and forearm fatigue alone is worth the price of the accessory. What's more, the connectors don't leak air like some cheaper fittings I've used. If you own air tools and don't already have these, put the magazine down and go buy some right now.
Industrial Ball Swivel Connectors 15-04BS. $7 each. Coilhose Pneumatics. 732-390-8480. www.coilhose.com .
–David R. Crosby

Pocket-Hole Jig

Pocket-hole joints are fast and reliable, and they stay tight, even under adverse conditions like high humidity. Pocket holes are old news in cabinet shops where drilling them involves big tables, pneumatic clamps, and some really expensive machines that don't fit in your truck. Now, the Kreg Jig brings this cabinet-grade joinery into the field for an easy-to-swallo...

Click here to read full article from Tools of the Trade