Galvanized Wall Ties Penfield NY

Do wall ties need to be galvanized in solid masonry walls in Penfield? The steel used in concrete is typically not coated. Wouldn't solid masonry offer protection similar to that offered by concrete?

Local Companies

Hanlon Architects
6605 Pittsford Palmyra Road, Suite W5
Fairport, NY
Patrick J. Morabito AIA Architect, P.C.
55 Sully''s Trail,Suite F
Pittsford, NY
Clark Patterson Lee
205 St. Paul Street,Suite 500
Rochester, NY
Hunt Engineers & Architects
4 Commercial Street,Suite 300
Rochester, NY
9x30 Design
62 Westland Avenue
Rochester, NY
Integrative Design & Architecture
38 Nelson Street
Rochester, NY
Blake H. Held, Architect
73 Taylor Road
Honeoye Falls, NY
Mitchell Architecture
5800 Pitttsford-Palmyra Road,P.O. Box #1058
Pittsford, NY
Bero Architecture P.C.
32 Winthrop Street
Rochester, NY
LaBella Associates, P.C.
585-454-6110
300 State Street, Suite 201
Rochester, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 1998

Do wall ties need to be galvanized in solid masonry walls? The steel used in concrete is typically not coated. Wouldn't solid masonry offer protection similar to that offered by concrete?
There is a substantial difference between the protection to steel offered by masonry and that offered by concrete. In concrete, the fluid cement paste completely covers the bars. In masonry, the steel is often dry-laid on the units and the mortar placed on the top. Therefore, the bars are not always encased completely in mortar. Sometimes there are voids along the bottom of the bars, which can allow condensation and moisture to accumulate.The corrosion potential of the steel is also affected by material porosity and diffusion rates of harmful ions (such as chlorides). Bare steel is protected initially by a passivating layer that forms in the highly alkaline environment of wet concrete or mortar. Carbonation will reduce the alkalinity of the mortar or concrete and eliminate this protection. Mortars, being more porous than concrete, will carbonate at greater rates. There is also greater potential for diffusion from chloride ions from acid cleaning or other sources. Depending on their concentration, chloride ions will eliminate the pacifying effect of the mortar. For these reasons, unprotected steel encased in mortar will have an increased corrosion potential at a young age.Requirements for concrete or mortar cover...

Click here to read full article from Masonry Construction

Related Articles
- Home Siding Tips Penfield NY
After installing window and door trim, either make flashing using a sheet metal brake or apply flashing pre-bent to the correct trim size. Nail your flashing to the wall, not to the trim, because if you put holes in the flashing, you've defeated its purpose.
- Fan-Fold Foam Board Penfield NY
- Drape Wall and Cloak Wall Penfield NY
- Flashing Factors Penfield NY
- Galvanized Wall Ties Penfield NY
- Foolproof Layout Method Plans Penfield NY
- Inner Corner at Base of Wall Penfield NY
- How Masonry Buildings Resist Earthquakes Penfield NY
- Fighting Fastener Corrosion Penfield NY
- High-Efficiency Products Penfield NY