Galvanized Wall Ties Beacon NY

Do wall ties need to be galvanized in solid masonry walls in Beacon? The steel used in concrete is typically not coated. Wouldn't solid masonry offer protection similar to that offered by concrete?

Local Companies

Julie Evans Architecture & Design
(914)271-1145
100 Benedict Blvd.
Croton On Hudson, NY
LMD Architect
420 S Riverside Ave Ste 716
Croton On Hudson, NY
Barbara B. Corwin Architect
1 Briggs Road
Cornwall-on-Hudson, NY
CSArch Architecture/Construction Management
19 Front Street,Apt 1
Newburgh, NY
Hibbs Architects
400 Market Industrial Park,Suite 12 Box 22
Wappingers Falls, NY
Berg Hennessy Olson Llp
(845)220-2070
50 Front Street
Newburgh, NY
SMA Architecture Planning Interiors, P.C
(914)271-2712
One Baltic Place
Croton-on-Hudson, NY
Highlands Architecture PLLC
1 Winterberry Rd
Beacon, NY
Battoglia Lanza Architectural Group PC
209 Old Route #9, Suite #5
Fishkill, NY
Minuta Architecture, PLLC
(845)565-0055
345 Windsor Highway,Suite 100
New Windsor, NY
Data Provided by:
  

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 1998

Do wall ties need to be galvanized in solid masonry walls? The steel used in concrete is typically not coated. Wouldn't solid masonry offer protection similar to that offered by concrete?
There is a substantial difference between the protection to steel offered by masonry and that offered by concrete. In concrete, the fluid cement paste completely covers the bars. In masonry, the steel is often dry-laid on the units and the mortar placed on the top. Therefore, the bars are not always encased completely in mortar. Sometimes there are voids along the bottom of the bars, which can allow condensation and moisture to accumulate.The corrosion potential of the steel is also affected by material porosity and diffusion rates of harmful ions (such as chlorides). Bare steel is protected initially by a passivating layer that forms in the highly alkaline environment of wet concrete or mortar. Carbonation will reduce the alkalinity of the mortar or concrete and eliminate this protection. Mortars, being more porous than concrete, will carbonate at greater rates. There is also greater potential for diffusion from chloride ions from acid cleaning or other sources. Depending on their concentration, chloride ions will eliminate the pacifying effect of the mortar. For these reasons, unprotected steel encased in mortar will have an increased corrosion potential at a young age.Requirements for concrete or mortar cover...

Click here to read full article from Masonry Construction

Related Articles
- Fighting Fastener Corrosion Beacon NY
Deck building used to be simpler. At the lumberyard, you’d load up on CCA-treated 2-by stock for the floor system, 6x6s for the posts, and whatever the budget allowed for the decking — anything from 1x6 pressure treated to more-expensive 1x4 Doug fir.
- High-Efficiency Products Beacon NY
- Foolproof Layout Method Plans Beacon NY
- Galvanized Wall Ties Beacon NY
- Flashing Factors Beacon NY
- Drape Wall and Cloak Wall Beacon NY
- Home Siding Tips Beacon NY
- Inner Corner at Base of Wall Beacon NY
- How Masonry Buildings Resist Earthquakes Beacon NY
- Fan-Fold Foam Board Beacon NY