Galvanized Wall Ties Baldwinsville NY

Do wall ties need to be galvanized in solid masonry walls in Baldwinsville? The steel used in concrete is typically not coated. Wouldn't solid masonry offer protection similar to that offered by concrete?

Local Companies

J.P. Megnin General Contracting
(315)391-1383
938 Cty Rt 11
West Monroe, NY
Expert Chimney Services, Inc
315 469 5004
4800 McDonald Rd
Syracuse, NY
Hess Corporation
(315) 234-5330
100 Clinton Sq.
Syracuse, NY
International Building Blocks
(585) 544-5663
169 Newcomb St
Rochester, NY
Skoda Design Inc
(212) 358-8340
126 E 12th St
New York, NY
Nu-Crete
315-720-6599
P.O. Box 145
Baldwinsville, NY
Ryan Heneka's Decorative Concrete
315.506.0336
105 Melvin Avenue
Liverpool, NY
New Heritage Woodworking
315-677-3884
7022 Bush Road
Jamesville, NY
Chalfont Construction Corp
(718) 229-4900
3924 Bell Blvd Ste 1
Bayside, NY
Fladd's Creative Stone Masonry
(585) 394-4290
4621 Bachelors Row
Canandaigua, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 1998

Do wall ties need to be galvanized in solid masonry walls? The steel used in concrete is typically not coated. Wouldn't solid masonry offer protection similar to that offered by concrete?

There is a substantial difference between the protection to steel offered by masonry and that offered by concrete. In concrete, the fluid cement paste completely covers the bars. In masonry, the steel is often dry-laid on the units and the mortar placed on the top. Therefore, the bars are not always encased completely in mortar. Sometimes there are voids along the bottom of the bars, which can allow condensation and moisture to accumulate. The corrosion potential of the steel is also affected by material porosity and diffusion rates of harmful ions (such as chlorides). Bare steel is protected initially by a passivating layer that forms in the highly alkaline environment of wet concrete or mortar. Carbonation will reduce the alkalinity of the mortar or concrete and eliminate this protection. Mortars, being more porous than concrete, will carbonate at greater rates. There is also greater potential for diffusion from chloride ions from acid cleaning or other sources. Depending on their concentration, chloride ions will eliminate the pacifying effect of the mortar. For these reasons, unprotected steel encased in mortar will have an increased corrosion potential at a young age. Requirements for concrete or mortar cover...

Click here to read full article from Masonry Construction

Related Articles
- Home Siding Tips Baldwinsville NY
After installing window and door trim, either make flashing using a sheet metal brake or apply flashing pre-bent to the correct trim size. Nail your flashing to the wall, not to the trim, because if you put holes in the flashing, you've defeated its purpose.
- Fan-Fold Foam Board Baldwinsville NY
- Galvanized Wall Ties Baldwinsville NY
- High-Efficiency Products Baldwinsville NY
- Flashing Factors Baldwinsville NY
- Inner Corner at Base of Wall Baldwinsville NY
- Drape Wall and Cloak Wall Baldwinsville NY
- How Masonry Buildings Resist Earthquakes Baldwinsville NY
- Fighting Fastener Corrosion Baldwinsville NY
- Foolproof Layout Method Plans Baldwinsville NY