Framing Gable and Shed Dormers South Richmond Hill NY

Whenever adding any type of dormer in South Richmond Hill, it's essential to determine the roof load and design the load path transfer to the existing floor joists or roof rafters. Then you can ensure adequate bearing points, or add framing and install beams to carry the loads through the walls down to the foundation. It wouldn't be a bad idea to consult a structural engineer for guidance, especially on larger dormers.

Local Companies

CEK International
(646) 468-4223
600 West 115 Street
New York, NY
Marc V. Cottone General contractor
718 983 7840
49 morse ave.
Staten Island, NY
Kost & Kost Roofing
718-898-2422
68-21 53Rd Ave.
Maspeth, NY
Nest Contracting
(646) 405-7787
24878 89th ave
Bellerose, NY
JC and Sons Home Improvement Corp.
(917) 652-6852
84-72 130th Street
Kew Gardens, NY
DB CONSTRUCTION
(347) 365-8284
592 BUSHWICK AVE
Brooklyn, NY
KS Construction and Kitchen Cabinets
(917) 864-2670
19541 Jamaica Avenue
Hollis, NY
Goode Green
212-226-6770
176 Grand Street
New York, NY
Leak Enders
516-620-4575
584 Mineola Ave
Carle Place, NY
ACJ Remodeling
(347) 688-7909
1146 East 92nd St
Brooklyn, NY
Data Provided by:
      

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 11, 2006

By TOOLS OF THE TRADE Editors

Whenever adding any type of dormer, it's essential to determine the roof load and design the load path transfer to the existing floor joists or roof rafters. Then you can ensure adequate bearing points, or add framing and install beams to carry the loads through the walls down to the foundation. It wouldn't be a bad idea to consult a structural engineer for guidance, especially on larger dormers.

Gable Dormers

Gable dormers get their name from the gable roof covering them. These dormers are built perpendicular to the existing roof plane, with their ridges extending out from the existing roof. This means the sidewalls of the dormer bear and transfer the weight of the dormer rafters to the existing main roof rafters or the existing floor joists in the room/attic below. Which way you decide to support the dormer loads depends on the interior layout you're shooting for.

Bearing on the Rafters. My first choice is to install double or triple roof rafters on either side of the new dormer for the sidewalls to rest on. This eliminates the need to remove attic subflooring to insert additional joists. It also leaves the area beneath the common rafters uncluttered without any walls to interfere with open space and provides freedom to lay out partition walls later.

I locate the position of the dormer and do as much work as possible inside the attic before opening up the roof.

Click here to read full article from Tools of the Trade