Framing Gable and Shed Dormers North Tonawanda NY

Whenever adding any type of dormer in North Tonawanda, it's essential to determine the roof load and design the load path transfer to the existing floor joists or roof rafters. Then you can ensure adequate bearing points, or add framing and install beams to carry the loads through the walls down to the foundation. It wouldn't be a bad idea to consult a structural engineer for guidance, especially on larger dormers.

Local Companies

Building Solutions
716-655-3210
6091 Seneca St
Elma, NY
All Buffalo Roofing & Painting
716 868-6737
91 Nassau Ave
Kenmore, NY
William C. Rott & Son, Inc.
716 694-8220
454 Young St
Tonawanda, NY
RIBCO, Inc.
(716) 883-1421
1032 Niagara St.
Buffalo, NY
Perfection Renovation Inc
(716) 393-8962
8105 Old Post
East Amherst, NY
Egleston General Construction
716-207-6977
Lancaster, NY
Built-Right Home Improvements
716-316-1831
6104 Walnut St.
Newfane, NY
Joseph E. Neubert Roofing, Inc.
716 833-2202
182 Wellington Ave
Buffalo, NY
Wnyhomeimprovement.Com
716-572-1053
112 Olanta St
Depew, NY
Roofmasters Roofing Co., Inc.
(716) 875-0276
381 Ontario St.
Buffalo, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 11, 2006

By TOOLS OF THE TRADE Editors

Whenever adding any type of dormer, it's essential to determine the roof load and design the load path transfer to the existing floor joists or roof rafters. Then you can ensure adequate bearing points, or add framing and install beams to carry the loads through the walls down to the foundation. It wouldn't be a bad idea to consult a structural engineer for guidance, especially on larger dormers.

Gable Dormers

Gable dormers get their name from the gable roof covering them. These dormers are built perpendicular to the existing roof plane, with their ridges extending out from the existing roof. This means the sidewalls of the dormer bear and transfer the weight of the dormer rafters to the existing main roof rafters or the existing floor joists in the room/attic below. Which way you decide to support the dormer loads depends on the interior layout you're shooting for.

Bearing on the Rafters. My first choice is to install double or triple roof rafters on either side of the new dormer for the sidewalls to rest on. This eliminates the need to remove attic subflooring to insert additional joists. It also leaves the area beneath the common rafters uncluttered without any walls to interfere with open space and provides freedom to lay out partition walls later.

I locate the position of the dormer and do as much work as possible inside the attic before opening up the roof.

Click here to read full article from Tools of the Trade