Framing Gable and Shed Dormers Central Islip NY

Whenever adding any type of dormer in Central Islip, it's essential to determine the roof load and design the load path transfer to the existing floor joists or roof rafters. Then you can ensure adequate bearing points, or add framing and install beams to carry the loads through the walls down to the foundation. It wouldn't be a bad idea to consult a structural engineer for guidance, especially on larger dormers.

Local Companies

universal construction of Dk inc
516 932 0623
61 Cheshire Rd
Bethpage, NY
Home Improvement Man Inc
(516) 681-3737
92 Ketchams Road
Hicksville, NY
Oyster Bay Roofing & Sheet Inc
(516) 922-3850
40 Pine Hollow Rd
Oyster Bay, NY
Tipperary Construction
(516) 679-2215
2567 Mermaid Ave
Wantagh, NY
Advanced Remodeling Of Long Island, Inc.
3790 Merrick Road
Seaford, NY
Nill Contracting
631-724-9511
14 regal ct
st james, NY
NEW YORK CITY BEST CONSTRUCTION CORP.
347-26-9950
25 BEECHWOOD PLACE
Massapequa Park, NJ
Mc Ardle Roofing & Siding
(631) 754-3203
23 Tanager Ln
Northport, NY
John J. Griffin Roofing
(877) 669-6269
619 Sunrise Hwy
West Babylon, NY
Sterling Home Designs, Inc.
15 Hub Lane
Levittown, NY
Data Provided by:
      

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 11, 2006

By TOOLS OF THE TRADE Editors

Whenever adding any type of dormer, it's essential to determine the roof load and design the load path transfer to the existing floor joists or roof rafters. Then you can ensure adequate bearing points, or add framing and install beams to carry the loads through the walls down to the foundation. It wouldn't be a bad idea to consult a structural engineer for guidance, especially on larger dormers.

Gable Dormers

Gable dormers get their name from the gable roof covering them. These dormers are built perpendicular to the existing roof plane, with their ridges extending out from the existing roof. This means the sidewalls of the dormer bear and transfer the weight of the dormer rafters to the existing main roof rafters or the existing floor joists in the room/attic below. Which way you decide to support the dormer loads depends on the interior layout you're shooting for.

Bearing on the Rafters. My first choice is to install double or triple roof rafters on either side of the new dormer for the sidewalls to rest on. This eliminates the need to remove attic subflooring to insert additional joists. It also leaves the area beneath the common rafters uncluttered without any walls to interfere with open space and provides freedom to lay out partition walls later.

I locate the position of the dormer and do as much work as possible inside the attic before opening up the roof.

Click here to read full article from Tools of the Trade