Framer's Guide to Engineered Lumber Oceanside NY

Engineered lumber in Oceanside does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
New York Lumber Co Inc
(718) 774-8900
600 Utica Ave
Brooklyn, NY
The Home Depot
(718)832-8553
550 Hamilton Ave
Brooklyn, NY
The Home Depot
(212)888-1512
980 3rd Ave
New York, NY
Sunrise Mall
(516) 797-2400
800 Sunrise Mall
Massapequa, NY
Monster Woodshop
888-506-6678
607 18th Street
Brooklyn, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Costello's Ace Hardware
(516) 798-0680
1330 Hicksville Rd, Marshalls
Massapequa, NY
The Home Depot
(718)507-9007
73-01 25th Avenue
East Elmhurst, NY
Lake Success S/C
(516) 574-5500
1400 Union Tpke
New Hyde Park, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 1, 2003

By Scott Woelful

Engineered lumber does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.

Beams and Rim Joists. When you hang joists off a built-up center-span LVL beam (or flush header), check the widths of the LVL components. I've seen these vary as much as 3/8 inch from one another, which is enough to throw a top-hung joist hanger out of line. When the hanger is off, it's difficult to set the joist properly. To compensate for this we assemble headers and beams and then power plane them flush to flatten the top edge, before installing hangers and joists.

OSB rim joists can vary in thickness. Moisture swells them quickly, which can affect your joist measurements and slow you down. The best strategy to avoid this is to schedule delivery of your rim joist material just in time to use it, and keep it as dry as possible until it's installed.

Storage. Manufacturers recommend storing I-joists on edge. If laid flat on uneven terrain, they can take on a wobble. Using layout marks on your floor sheathing helps you keep joists in line as you lay the sheathing.

Cutting. You don't have to, but we find it's easier to use guides for cutting I-joists.

Click here to read full article from Tools of the Trade

Related Articles
- Fighting Fastener Corrosion Oceanside NY
Deck building used to be simpler. At the lumberyard, you’d load up on CCA-treated 2-by stock for the floor system, 6x6s for the posts, and whatever the budget allowed for the decking — anything from 1x6 pressure treated to more-expensive 1x4 Doug fir.
- Fasteners and Connectors Oceanside NY
- Festool Circ Saw and Guide Rail System Oceanside NY
- Frugal House Framing Oceanside NY
- Home Exterior Ideas Oceanside NY
- Green Building Products Oceanside NY
- Forklift Operation Oceanside NY
- Engineered Lumber Oceanside NY
- Ergonomic Principles of Forklift Design Oceanside NY
- Green Products - Product Reviews Oceanside NY