Framer's Guide to Engineered Lumber Buffalo NY

Engineered lumber in Buffalo does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.

Local Companies

Certainly Wood, Inc.
716-655-0206
13000 Route 78
East Aurora, NY
RC Tonewoods
716-873-6043
1109 Military Road
Buffalo, NY
Woodcraft - Buffalo, NY
(716) 674-0795
1900 Ridge Road
West Seneca, NY
The Home Depot
(716)895-6680
300 Thruway Plaza Dr
Cheektowaga, NY
Kmart 4123 / Cross Merch
(716) 297-3900
2590 Military Rd
Niagara Falls, NY
Advantage Trim & Lumber Co
716-827-3915
601 Ohio St
Buffalo, NY
Niagara Lumber and Wood Products, Inc.
716-655-2142
47 Elm Street
East Aurora,, NY
Rockler Woodworking and Hardware #11
(716) 631-8922
5085 Transit Rd
Buffalo, NY
Ed Youngs True Value Hdw.
(716) 632-3150
5641 Main St
Williamsville, NY
The Home Depot
(716)236-0761
750 Builders Way
Niagara Falls, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: March 1, 2003

By Scott Woelful

Engineered lumber does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.

Beams and Rim Joists. When you hang joists off a built-up center-span LVL beam (or flush header), check the widths of the LVL components. I've seen these vary as much as 3/8 inch from one another, which is enough to throw a top-hung joist hanger out of line. When the hanger is off, it's difficult to set the joist properly. To compensate for this we assemble headers and beams and then power plane them flush to flatten the top edge, before installing hangers and joists.

OSB rim joists can vary in thickness. Moisture swells them quickly, which can affect your joist measurements and slow you down. The best strategy to avoid this is to schedule delivery of your rim joist material just in time to use it, and keep it as dry as possible until it's installed.

Storage. Manufacturers recommend storing I-joists on edge. If laid flat on uneven terrain, they can take on a wobble. Using layout marks on your floor sheathing helps you keep joists in line as you lay the sheathing.

Cutting. You don't have to, but we find it's easier to use guides for cutting I-joists.

Click here to read full article from Tools of the Trade

Related Articles
- Fighting Fastener Corrosion Buffalo NY
Deck building used to be simpler. At the lumberyard, you’d load up on CCA-treated 2-by stock for the floor system, 6x6s for the posts, and whatever the budget allowed for the decking — anything from 1x6 pressure treated to more-expensive 1x4 Doug fir.
- Forklift Operation Buffalo NY
- Frugal House Framing Buffalo NY
- Green Products - Product Reviews Buffalo NY
- Home Exterior Ideas Buffalo NY
- Ergonomic Principles of Forklift Design Buffalo NY
- Engineered Lumber Buffalo NY
- Festool Circ Saw and Guide Rail System Buffalo NY
- Fasteners and Connectors Buffalo NY
- Green Building Products Buffalo NY