Form-Release Agents South Richmond Hill NY

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Local Companies

DB CONSTRUCTION
(347) 365-8284
592 BUSHWICK AVE
Brooklyn, NY
NEW YORK CITY BEST CONSTRUCTION CORP.
347-26-9950
25 BEECHWOOD PLACE
Massapequa Park, NJ
Aba Studio
(212)206-8929
88 University Place Floor 11
New York, NY
Baker Anthony C & Associates
(212)947-5818
110 West 32Nd Street
New York, NY
Ronnette Riley Architect
350 Fifth Avenue,Suite 7401
New York, NY
Alure Home Improvements
1999 Hempstead Turnpike
East Meadow, NY
CEK International
(646) 468-4223
600 West 115 Street
New York, NY
1100 Architects Pc
(212)645-1011
475 10 Av
New York, NY
Abs Architects
(212)625-8476
580 Broadway
New York, NY
Minervini-Vandermark Architects
(201)386-0637
401 Jefferson Street
Hoboken, NJ
Data Provided by:
      

Source: The Concrete Producer/Concrete Journal
Publication date: February 1, 2000

By M.K. Hurd

Abstract:

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Today, precasters can choose from among hundreds of form-release products, and new ones are still being developed. Many changes have been introduced as manufacturers scramble to meet federal and state environmental regulations, particularly with respect to volatile organic compounds (VOCs).

Release agents are classified by how they work rather than what they contain. Two basic categories are barrier agents and chemically active agents (also referred to as reactive agents). Some release agents are a combination of the two types.

VOC emissions from architectural coatings under Section 183(e) of the Clean Air Act were enforced throughout the United States beginning Sept. 13, 1999. Form-release agents, which are classified by the act as architectural coatings, are among the products affected.

Although the regulations apply directly only to manufacturers, they will set limits on what producers can buy as a release agent.

A six-page form-release agent selection guide, compiled from manufacturer information, answers some of your questions.

The full text of this article is available as a PDF document. To download the PDF version of the article, click here.

Click here to read full article from The Concrete Producer

Related Articles
- Formwork Rust South Richmond Hill NY
Steel formwork is used in prefabrication operations because of its robustness and reusability, as well as its ability to produce prefabricated units with smooth surfaces. On these steel molds, brownish-reddish rust spots sometimes form while the concrete hardens. This rust could lead to brown or red spotty discolorations on the concrete surface lower the concrete element's appearance, Fig. 1 .
- Expanding Outdoor Advertisements South Richmond Hill NY
- Hiring New Employees South Richmond Hill NY
- Forklift Maintenance Tips South Richmond Hill NY
- How to Regreen a Home South Richmond Hill NY
- Flue Liners for Masonry Chimneys South Richmond Hill NY
- High Cement Content Problems South Richmond Hill NY
- Energy-Efficient Product Reviews South Richmond Hill NY
- Fiber Reinforced Concrete South Richmond Hill NY
- Furniture Review South Richmond Hill NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details