Form-Release Agents Monsey NY

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Local Companies

R.C. Keller & Associates
(973)694-8810
31 Corvair Place Suite 110
Wayne, NJ
Jody Schornstein, Architect
110 Wildwood Avenue
Montclair, NJ
Vincent C. Graziano, AIA LLC
(201)385-5359
135 West Quackenbush Avenue
Dumont, NJ
Neil Carnow AIA Architect
325 North Highland Avenue
Ossining, NY
Steven Urbach Architects
11 Scotland Hill Park
Chestnut Ridge, NY
ADG Construction LLc.
(201) 446-9491
307 Dorothy Street
Fair Lawn, NJ
Daniel L. Russell Architect
22 Chilhowie Dr.
Kinnelon, NJ
JSB Planning
7 Mac Arthur Avenue
Closter, NJ
Perry M. Petrillo Achitects
(201)307-6153
9 Park Ave
Park Ridge, NJ
Meckler Associates
144 Route 59
Suffern, NY
Data Provided by:
    

Source: The Concrete Producer/Concrete Journal
Publication date: February 1, 2000

By M.K. Hurd

Abstract:

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Today, precasters can choose from among hundreds of form-release products, and new ones are still being developed. Many changes have been introduced as manufacturers scramble to meet federal and state environmental regulations, particularly with respect to volatile organic compounds (VOCs).

Release agents are classified by how they work rather than what they contain. Two basic categories are barrier agents and chemically active agents (also referred to as reactive agents). Some release agents are a combination of the two types.

VOC emissions from architectural coatings under Section 183(e) of the Clean Air Act were enforced throughout the United States beginning Sept. 13, 1999. Form-release agents, which are classified by the act as architectural coatings, are among the products affected.

Although the regulations apply directly only to manufacturers, they will set limits on what producers can buy as a release agent.

A six-page form-release agent selection guide, compiled from manufacturer information, answers some of your questions.

The full text of this article is available as a PDF document. To download the PDF version of the article, click here.

Click here to read full article from The Concrete Producer

Related Articles
- Flue Liners for Masonry Chimneys Monsey NY
Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.
- Expanding Outdoor Advertisements Monsey NY
- How to Regreen a Home Monsey NY
- Formwork Rust Monsey NY
- High Cement Content Problems Monsey NY
- Energy-Efficient Product Reviews Monsey NY
- Fiber Reinforced Concrete Monsey NY
- Hiring New Employees Monsey NY
- Forklift Maintenance Tips Monsey NY
- Furniture Review Monsey NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details