Form-Release Agents Liverpool NY

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Local Companies

Michael J. Lehman, AIA, LEED AP - Architect
PO Box 412
Fayetteville, NY
Robert O. Eggleston, Architect
1391 East Genesee St.
Skaneateles, NY
VIP Architectural Associates
1 Websters Landing
Syracuse, NY
Schopfer Architects
1111 James Street
Syracuse, NY
William S. Elkins, Architect
(315)449-1627
203 Scott Ave.
Syracuse, NY
R. A. Coogan AIA Architect
8349 South Main Street
Cicero, NY
Thomas Arctander Architects PC
3184 Pepperwood Bend
Marcellus, NY
QPK Design Architecture
(315)472-7806
450 S. Salina Street,P.O. Box 29
Syracuse, NY
VIP Structures
(315)471-5338
One Webster''s Landing
Syracuse, NY
Wyatt Howard Nelson, Architect
215 Wyoming Street
Syracuse, NY

Source: The Concrete Producer/Concrete Journal
Publication date: February 1, 2000

By M.K. Hurd

Abstract:

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Today, precasters can choose from among hundreds of form-release products, and new ones are still being developed. Many changes have been introduced as manufacturers scramble to meet federal and state environmental regulations, particularly with respect to volatile organic compounds (VOCs).

Release agents are classified by how they work rather than what they contain. Two basic categories are barrier agents and chemically active agents (also referred to as reactive agents). Some release agents are a combination of the two types.

VOC emissions from architectural coatings under Section 183(e) of the Clean Air Act were enforced throughout the United States beginning Sept. 13, 1999. Form-release agents, which are classified by the act as architectural coatings, are among the products affected.

Although the regulations apply directly only to manufacturers, they will set limits on what producers can buy as a release agent.

A six-page form-release agent selection guide, compiled from manufacturer information, answers some of your questions.

The full text of this article is available as a PDF document. To download the PDF version of the article, click here.

Click here to read full article from The Concrete Producer

Related Articles
- Flue Liners for Masonry Chimneys Liverpool NY
Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.
- Fiber Reinforced Concrete Liverpool NY
- Hiring New Employees Liverpool NY
- Expanding Outdoor Advertisements Liverpool NY
- How to Regreen a Home Liverpool NY
- Furniture Review Liverpool NY
- High Cement Content Problems Liverpool NY
- Forklift Maintenance Tips Liverpool NY
- Formwork Rust Liverpool NY
- Energy-Efficient Product Reviews Liverpool NY