Form-Release Agents Hamburg NY

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Local Companies

Trautman Associates
(716) 883-4400
470 Franklin St.
Buffalo, NY
J.L. Moore, Inc.
(716) 912-8799
1 Trillium Place
Orchard Park, NY
Stieglitz Snyder Architecture
425 Franklin Street
Buffalo, NY
Stievater + Hearn: Architects
(716)855-2000
255 Pearl St
Buffalo, NY
Zaxis Architectural, P.C.
(716)923-0133
4245 Union Road,Suite 210
Buffalo, NY
Gordon W. Jones Associates
(716) 633-9000
5757 Main St.
Williamsville, NY
Watts Architecture & Engineering, P.C.
(716) 836-1540
3826 Main St.
Amherst, NY
Scheid Architectural
(716)884-0059
111 Elmwood Avenue
Buffalo, NY
David W. DeBoy Architect
443 Delaware Ave
Buffalo, NY
Chaintreuil, Jensen, Stark Architects
303 South Park Avenue
Buffalo, NY

Source: The Concrete Producer/Concrete Journal
Publication date: February 1, 2000

By M.K. Hurd

Abstract:

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Today, precasters can choose from among hundreds of form-release products, and new ones are still being developed. Many changes have been introduced as manufacturers scramble to meet federal and state environmental regulations, particularly with respect to volatile organic compounds (VOCs).

Release agents are classified by how they work rather than what they contain. Two basic categories are barrier agents and chemically active agents (also referred to as reactive agents). Some release agents are a combination of the two types.

VOC emissions from architectural coatings under Section 183(e) of the Clean Air Act were enforced throughout the United States beginning Sept. 13, 1999. Form-release agents, which are classified by the act as architectural coatings, are among the products affected.

Although the regulations apply directly only to manufacturers, they will set limits on what producers can buy as a release agent.

A six-page form-release agent selection guide, compiled from manufacturer information, answers some of your questions.

The full text of this article is available as a PDF document. To download the PDF version of the article, click here.

Click here to read full article from The Concrete Producer

Related Articles
- Formwork Rust Hamburg NY
Steel formwork is used in prefabrication operations because of its robustness and reusability, as well as its ability to produce prefabricated units with smooth surfaces. On these steel molds, brownish-reddish rust spots sometimes form while the concrete hardens. This rust could lead to brown or red spotty discolorations on the concrete surface lower the concrete element's appearance, Fig. 1 .
- Hiring New Employees Hamburg NY
- Flue Liners for Masonry Chimneys Hamburg NY
- Energy-Efficient Product Reviews Hamburg NY
- Furniture Review Hamburg NY
- Fiber Reinforced Concrete Hamburg NY
- Expanding Outdoor Advertisements Hamburg NY
- High Cement Content Problems Hamburg NY
- Forklift Maintenance Tips Hamburg NY
- How to Regreen a Home Hamburg NY