Form-Release Agents Fulton NY

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Local Companies

Reimann Buechner Partnership
(315) 475-7266
290 Elwood Davis Rd
Liverpool, NY
Tessarzik Development Industries Inc
(518) 827-3111
304 Main St
Middleburgh, NY
Wavecrest Management
(516) 608-8458
3 Meehan Ln
Rockville Centre, NY
Bovis Construction Corp
(518) 348-1977
7 Corporate Dr
Clifton Park, NY
Silverman Nathan
(212) 385-1818
100 Church St
New York, NY
J C M Architectural Associates
(315) 424-0141
7449 Morgan Rd
Liverpool, NY
R. A. Coogan AIA Architect
8349 South Main Street
Cicero, NY
New Century Construction Corp
(718) 542-8100
1125 Longwood Ave
Bronx, NY
Eventus Construction Co Inc
(914) 245-2400
1 Watergate Dr
Amawalk, NY
Hanes Assocs Inc
(516) 759-4810

Locust Valley, NY

Source: The Concrete Producer/Concrete Journal
Publication date: February 1, 2000

By M.K. Hurd

Abstract:

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Today, precasters can choose from among hundreds of form-release products, and new ones are still being developed. Many changes have been introduced as manufacturers scramble to meet federal and state environmental regulations, particularly with respect to volatile organic compounds (VOCs).

Release agents are classified by how they work rather than what they contain. Two basic categories are barrier agents and chemically active agents (also referred to as reactive agents). Some release agents are a combination of the two types.

VOC emissions from architectural coatings under Section 183(e) of the Clean Air Act were enforced throughout the United States beginning Sept. 13, 1999. Form-release agents, which are classified by the act as architectural coatings, are among the products affected.

Although the regulations apply directly only to manufacturers, they will set limits on what producers can buy as a release agent.

A six-page form-release agent selection guide, compiled from manufacturer information, answers some of your questions.

The full text of this article is available as a PDF document. To download the PDF version of the article, click here.

Click here to read full article from The Concrete Producer

Related Articles
- Formwork Rust Fulton NY
Steel formwork is used in prefabrication operations because of its robustness and reusability, as well as its ability to produce prefabricated units with smooth surfaces. On these steel molds, brownish-reddish rust spots sometimes form while the concrete hardens. This rust could lead to brown or red spotty discolorations on the concrete surface lower the concrete element's appearance, Fig. 1 .
- Hiring New Employees Fulton NY
- High Cement Content Problems Fulton NY
- Fiber Reinforced Concrete Fulton NY
- Flue Liners for Masonry Chimneys Fulton NY
- How to Regreen a Home Fulton NY
- Forklift Maintenance Tips Fulton NY
- Furniture Review Fulton NY
- Energy-Efficient Product Reviews Fulton NY
- Expanding Outdoor Advertisements Fulton NY