Form-Release Agents Brockport NY

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Local Companies

N. Christopher - Architectural Specifications, P.C.
15662 Ridge Rd W
Kent, NY
Barkstrom & Lacroix Architects
50 Chestnut Street
Rochester, NY
Chaintreuil Jensen & Stark Architects
54 S Union St
Rochester, NY
LaBella Associates, P.C.
585-454-6110
300 State Street, Suite 201
Rochester, NY
9x30 Design
62 Westland Avenue
Rochester, NY
Integrative Design & Architecture
38 Nelson Street
Rochester, NY
Clark Patterson Lee
205 St. Paul Street,Suite 500
Rochester, NY
Smith+Associates Architects, PLLC
263 Central Ave
Rochester, NY
Hunt Engineers & Architects
4 Commercial Street,Suite 300
Rochester, NY
Bergmann Associates
(585)232-5137
200 First Federal Plaza
Rochester, NY

Source: The Concrete Producer/Concrete Journal
Publication date: February 1, 2000

By M.K. Hurd

Abstract:

Form-release agents or form oils represent only a small fraction of the cost of a manufactured concrete item, but they have a big influence on the quality and appearance of the concrete surface.

Today, precasters can choose from among hundreds of form-release products, and new ones are still being developed. Many changes have been introduced as manufacturers scramble to meet federal and state environmental regulations, particularly with respect to volatile organic compounds (VOCs).

Release agents are classified by how they work rather than what they contain. Two basic categories are barrier agents and chemically active agents (also referred to as reactive agents). Some release agents are a combination of the two types.

VOC emissions from architectural coatings under Section 183(e) of the Clean Air Act were enforced throughout the United States beginning Sept. 13, 1999. Form-release agents, which are classified by the act as architectural coatings, are among the products affected.

Although the regulations apply directly only to manufacturers, they will set limits on what producers can buy as a release agent.

A six-page form-release agent selection guide, compiled from manufacturer information, answers some of your questions.

The full text of this article is available as a PDF document. To download the PDF version of the article, click here.

Click here to read full article from The Concrete Producer

Related Articles
- Formwork Rust Brockport NY
Steel formwork is used in prefabrication operations because of its robustness and reusability, as well as its ability to produce prefabricated units with smooth surfaces. On these steel molds, brownish-reddish rust spots sometimes form while the concrete hardens. This rust could lead to brown or red spotty discolorations on the concrete surface lower the concrete element's appearance, Fig. 1 .
- How to Regreen a Home Brockport NY
- Expanding Outdoor Advertisements Brockport NY
- Furniture Review Brockport NY
- High Cement Content Problems Brockport NY
- Hiring New Employees Brockport NY
- Forklift Maintenance Tips Brockport NY
- Fiber Reinforced Concrete Brockport NY
- Energy-Efficient Product Reviews Brockport NY
- Flue Liners for Masonry Chimneys Brockport NY