Forklift Maintenance Tips Schenectady NY

Forklifts play a key role in handling a variety of materials and products. To keep them operating dependably and at peak efficiency, it is important to keep them properly maintained.1. When servicing a forklift, choose a clean work area. Before starting inspection and repair, shut down the engine and release all hydraulic pressure.

Local Companies

Concord Commercial
(585) 383-5440
70 Linden Oaks
East Rochester, NY
Concord Leasing
(718) 965-9117
714 3rd Ave
Brooklyn, NY
Anchor Leasing Corp
(718) 585-2258
885 E 149th St
Bronx, NY
M & W Leasing Co Inc
(516) 681-3600
114 Wayne St
Jericho, NY
Wasco Funding Corp
(845) 353-0219
128 Foxwood Rd
West Nyack, NY
Ubs Leasing
(718) 392-6700
4210 27th St
Long Island City, NY
Abco Leasing & Funding
(716) 691-2653
2005 Niagara Falls Blvd
Amherst, NY
Danken Leasing Corp
(607) 732-2911
93 Industrial Park Blvd
Elmira, NY
The Teddy Fund Inc
(631) 588-5417
2 Pearl St
Holbrook, NY
Lee Dyeing Corp
(518) 736-5232
328 N Perry St
Johnstown, NY

Source: The Concrete Producer/Concrete Journal
Publication date: February 1, 1995

By John A. Koski

Abstract: Forklifts play a key role in handling a variety of materials and products. To keep them operating dependably and at peak efficiency, it is important to keep them properly maintained.

1. When servicing a forklift, choose a clean work area. Before starting inspection and repair, shut down the engine and release all hydraulic pressure. Block all moving parts securely, or lower them to full ground contact. Place all controls in neutral, block the wheels, and disconnect the battery.

2. Make sure stored fuel is kept free of contaminants such as dirt or water, and do not store it for extended periods of time. Change the fuel filter often and make sure tank is kept full to avoid condensation. Inspect and clean air filters often, in accordance with the owner's manual.

3. When lubricating, make sure grease fittings are clean. Do not damage the bearings by adding too much grease. Make sure you know the location of all grease fittings. Keep hydraulic oil clean. Contaminated oil can wear hydraulic components out quickly. If forklift is going to be stored for an extended period of time, make sure it is well lubricated and cleaned before storage.

4. Batteries should be kept clean and filled at all times.

Click here to read full article from The Concrete Producer

Related Articles
- Framer's Guide to Engineered Lumber Schenectady NY
Engineered lumber does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.
- How to Choose a Grout Vibrator Schenectady NY
- Forklift Operation Schenectady NY
- Efficiency of Plant Operation Schenectady NY
- Ergonomic Principles of Forklift Design Schenectady NY
- Hardwood Decks Schenectady NY
- Finding the Serious Buyer Schenectady NY
- Door Review Schenectady NY
- FAST Implementation Tips Schenectady NY
- Eco-Friendly Product Reviews Schenectady NY