Forklift Maintenance Tips Rockaway Park NY

Forklifts play a key role in handling a variety of materials and products. To keep them operating dependably and at peak efficiency, it is important to keep them properly maintained.1. When servicing a forklift, choose a clean work area. Before starting inspection and repair, shut down the engine and release all hydraulic pressure.

Local Companies

Down Neck Equipment Rentals
(973) 690-5533
188 Pulaski St
Newark, NJ
Hudson Appraisal Service
(201) 432-6066
781 Garfield Ave
Jersey City, NJ
Five Stars Building Supply Inc
(718) 539-1988
13305 32nd Ave
Flushing, NY
Interstate Hardwood Lumber Co
(908) 353-5661
850 Flora St
Elizabeth, NJ
Palin Enterprises
(908) 355-0159
107 Trumbull St
Elizabeth, NJ
New York Concrete
(718) 967-3720
708 Sharrotts Rd
Staten Island, NY
Duncan Hardware
(201) 435-1700
776 W Side Ave
Jersey City, NJ
J B Equipment & Hardwood Sales Corp
(718) 298-8000
10828 Guy R Brewer Blvd
Jamaica, NY
Oso 1 Corporation
(718) 747-6360
13131 31st Ave
Flushing, NY
Metropolitan Distnbution Inc
(908) 965-1700
628 Henry St
Elizabeth, NJ

Source: The Concrete Producer/Concrete Journal
Publication date: February 1, 1995

By John A. Koski

Abstract: Forklifts play a key role in handling a variety of materials and products. To keep them operating dependably and at peak efficiency, it is important to keep them properly maintained.

1. When servicing a forklift, choose a clean work area. Before starting inspection and repair, shut down the engine and release all hydraulic pressure. Block all moving parts securely, or lower them to full ground contact. Place all controls in neutral, block the wheels, and disconnect the battery.

2. Make sure stored fuel is kept free of contaminants such as dirt or water, and do not store it for extended periods of time. Change the fuel filter often and make sure tank is kept full to avoid condensation. Inspect and clean air filters often, in accordance with the owner's manual.

3. When lubricating, make sure grease fittings are clean. Do not damage the bearings by adding too much grease. Make sure you know the location of all grease fittings. Keep hydraulic oil clean. Contaminated oil can wear hydraulic components out quickly. If forklift is going to be stored for an extended period of time, make sure it is well lubricated and cleaned before storage.

4. Batteries should be kept clean and filled at all times.

Click here to read full article from The Concrete Producer