Forklift Maintenance Tips Long Island City NY

Forklifts play a key role in handling a variety of materials and products. To keep them operating dependably and at peak efficiency, it is important to keep them properly maintained.1. When servicing a forklift, choose a clean work area. Before starting inspection and repair, shut down the engine and release all hydraulic pressure.

Local Companies

Gall John J Crane Svce Inc
(718) 442-3693
71 Catherine St
Staten Island, NY
PMT Forklift Corp
(718) 298-5270
148-14 Liberty Ave
Jamaica, NY
Waland Group LLC
(718) 961-0111
3607 College Point Blvd
Flushing, NY
Videx Equipment Corp
(973) 742-4800
74 Railroad Ave
Paterson, NJ
Electric Outlet Wholesale Distributors
(908) 965-1200
425 N Broad St
Elizabeth, NJ
Vanbro Industries
(718) 698-1100
1900 South Ave
Staten Island, NY
Thomas Forklift Services Inc
(973) 371-0860
224 Kerrigan Blvd
Newark, NJ
Heavy Equip Repair Corp of Ny Inc
(718) 995-4300
15054 183rd St
Jamaica, NY
Oso 1 Corporation
(718) 747-6360
13131 31st Ave
Flushing, NY
Interstate Hardwood Lumber Co
(908) 353-5661
850 Flora St
Elizabeth, NJ

Source: The Concrete Producer/Concrete Journal
Publication date: February 1, 1995

By John A. Koski

Abstract: Forklifts play a key role in handling a variety of materials and products. To keep them operating dependably and at peak efficiency, it is important to keep them properly maintained.

1. When servicing a forklift, choose a clean work area. Before starting inspection and repair, shut down the engine and release all hydraulic pressure. Block all moving parts securely, or lower them to full ground contact. Place all controls in neutral, block the wheels, and disconnect the battery.

2. Make sure stored fuel is kept free of contaminants such as dirt or water, and do not store it for extended periods of time. Change the fuel filter often and make sure tank is kept full to avoid condensation. Inspect and clean air filters often, in accordance with the owner's manual.

3. When lubricating, make sure grease fittings are clean. Do not damage the bearings by adding too much grease. Make sure you know the location of all grease fittings. Keep hydraulic oil clean. Contaminated oil can wear hydraulic components out quickly. If forklift is going to be stored for an extended period of time, make sure it is well lubricated and cleaned before storage.

4. Batteries should be kept clean and filled at all times.

Click here to read full article from The Concrete Producer