Foolproof Layout Method Plans Webster NY

When framing walls in Webster, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Springs Mike Landscaping
(585) 720-9029
895 Meigs St
Rochesainter, NY
Reimann Buechner Partnership
(585) 546-8384
133 Fitzhugh St S
Rochesainter, NY
Rochester Landscape
(585) 242-7590
171 Reservoir Ave
Rochesainter, NY
Affordable Tree & Landscape
(585) 802-2392
1082b Mount Hope Ave
Rochesainter, NY
Ppc Snowplowing and Landscape
(585) 461-4024
29 Stewart St
Rochesainter, NY
Benny's Lawn & Landscaping, LLC
(585) 247-8406
Rochesainter, NY
Educated Landscape Walkways
(585) 309-1851
Rochesainter, NY
Ams Lawn & Landscape
(585) 737-7580
Rochesainter, NY
Dufresne-Henry
(585) 454-2080
151 Saint Paul St Ste 5
Rochesainter, NY
Leyland Landscape Incorporated
(585) 235-2190
Rochesainter, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- Eliminating Swirls in Precast Panels Webster NY
What can we do to eliminate swirls in precast panels? Sid Freedman of the Precast/Prestressed Concrete Institute says such swirls are signs of segregation caused by the placing method. Read on to know more.
- Framing Gable and Shed Dormers Webster NY
- Hidden-Fastener Tool Webster NY
- Framing Square Webster NY
- Framer's Guide to Engineered Lumber Webster NY
- How Masonry Buildings Resist Earthquakes Webster NY