Foolproof Layout Method Plans Sayville NY

When framing walls in Sayville, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Landscape Design By Lee
(631) 589-0076
Sayville Boulevard
Sayville, NY
Interstate Home Loan Center
(631) 589-1111
99 Hiddink St
Sayville, NY
MacCo Construction
(631) 218-7997
3 Northgate Dr
Sayville, NY
Chase Whol Dstrbtr
(631) 589-1111
99 Hiddink St
Sayville, NY
Daz Construction
(516) 822-0255

Hicksville, NY
Long Island landscping Ltd.
800-986-9520
36 Lincoln Ave.
Bay Shore, NY
Landscapes By Lee Itzler
631-368-8626
486 Elwood Road
East Northport, NY
Dgc Capital Contracting
(631) 218-1042
102 N Main St
Sayville, NY
Rizzo Building & Remodeling
(631) 589-0085
158 Division Ave W
Sayville, NY
Mgc Contractors
(631) 563-5191
132 Clyde W
Sayville, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- How Masonry Buildings Resist Earthquakes Sayville NY
Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.
- Framing Square Sayville NY
- Framer's Guide to Engineered Lumber Sayville NY
- Framing Gable and Shed Dormers Sayville NY
- Hidden-Fastener Tool Sayville NY
- Eliminating Swirls in Precast Panels Sayville NY