Foolproof Layout Method Plans Port Chester NY

When framing walls in Port Chester, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Hickory Landscaping
203-838-1119
5 Pogany Street
Norwalk, CT
Ny Landscape Lighting
914-523-2578
245 Bronx River Road 3B
Yonkers, NY
White Plains Landscaping Incorporated
(914) 949-1214
114 N Broadway
White Plains, NY
A Aversa Landscaping & Masonry
(914) 946-6339
220 Gainsborg Ave E
White Plains, NY
Chavez Landscaping
(914) 949-2084
24 Longdale Ave
White Plains, NY
A Palmieri Landscaping Company, Inc
914-699-2257
6 Penn Place
Pelham Manor, NY
Land Masters
(203) 210-7201
1117 East Putnam Avenue
Riverside, CT
Visione Landscaping Inc.
914-769-7586
343 Sherman Avenue
Hawthorne, NY
Luna Landscape Corporation
(914) 428-3317
White Plains, NY
Rtj Landscaping & Construction Company
(914) 347-7013
121 Fulton St
White Plains, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- How Masonry Buildings Resist Earthquakes Port Chester NY
Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.
- Hidden-Fastener Tool Port Chester NY
- Framing Square Port Chester NY
- Framing Gable and Shed Dormers Port Chester NY
- Framer's Guide to Engineered Lumber Port Chester NY
- Eliminating Swirls in Precast Panels Port Chester NY