Foolproof Layout Method Plans Peekskill NY

When framing walls in Peekskill, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Green Environment Landscaping
(914) 686-4223
254 Martine Ave
White Plains, NY
Macchia Landscaping Incorporated
(914) 761-1116
115 Lake St
White Plains, NY
Caridi Circle Landscaping & Construction
(914) 948-2323
132 Russell St
White Plains, NY
Envision Landscaping Incorporated
(845) 565-3989
17 Herman Ave
Newburgh, NY
JP Landscaping
(845) 564-1155
400 Plum Ct
Newburgh, NY
Visione Landscaping Inc.
914-769-7586
343 Sherman Avenue
Hawthorne, NY
White Plains Landscaping Incorporated
(914) 949-1214
114 N Broadway
White Plains, NY
M & A Landscaping Incorporated
(914) 949-3015
91 Lincoln Ave E
White Plains, NY
Jordan's Landscaping
(845) 561-6706
18 Old Little Britain Rd
Newburgh, NY
Hustis Peter R
(845) 562-0060
826 Broadway
Newburgh, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- Framing Square Peekskill NY
When someone says "framing square," we all probably think of the same object. But before it became a mass-produced tool in early 19th century America–and the tool we all think of–medieval European timber framers used framing squares to lay out bents and ribbed vaults for houses and cathedrals.
- Eliminating Swirls in Precast Panels Peekskill NY
- Framer's Guide to Engineered Lumber Peekskill NY
- Framing Gable and Shed Dormers Peekskill NY
- Hidden-Fastener Tool Peekskill NY
- How Masonry Buildings Resist Earthquakes Peekskill NY