Foolproof Layout Method Plans Lindenhurst NY

When framing walls in Lindenhurst, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Landscape Design By Lee
(631) 589-0076
Sayville Boulevard
Sayville, NY
Landscapes By Lee Itzler
631-368-8626
486 Elwood Road
East Northport, NY
Kascon Contrctng Corp
(631) 957-2697
21 Venetian Promenade
Lindenhurst, NY
Keith's American Made Handyman
(631) 884-3455
121 N Delaware Ave
Lindenhurst, NY
Jim Walsh Contracting
(631) 888-1437
569 N Lewis Ave
Lindenhurst, NY
Long Island landscping Ltd.
800-986-9520
36 Lincoln Ave.
Bay Shore, NY
Morell Landscape Associates
516-338-9095
150H School St.
westbury, NY
Design and Build Landscape
(516) 355-8114
27 Florence Avenue
Massapequa, NY
American Building Contractors Associates
(631) 587-0928
805 Albin Ave
Lindenhurst, NY
Lindenhurst Homes Ltd
(631) 888-2934
145 Sunrise Hwy Ste 6
Lindenhurst, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- How Masonry Buildings Resist Earthquakes Lindenhurst NY
Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.
- Framer's Guide to Engineered Lumber Lindenhurst NY
- Hidden-Fastener Tool Lindenhurst NY
- Framing Square Lindenhurst NY
- Eliminating Swirls in Precast Panels Lindenhurst NY
- Framing Gable and Shed Dormers Lindenhurst NY