Foolproof Layout Method Plans Latham NY

When framing walls in Latham, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Breedlove Landscaping
(518) 248-5400
Troy, NY
Nick's Lawncare
(518) 892-1522
400 Mcchesney Ave Ext
Troy, NY
Stone Creations
(518) 365-5793
Albany, NY
Brennan Landscaping
(518) 785-9958
2269 1st St
Schenectady, NY
Wolberg Electl Suppl CO Incorporated
(518) 381-9231
152 Erie Blvd
Schenectady, NY
Bob Fiato Landscaping & Maintenance
(518) 465-7122
1432 2nd St
Rensselaer, NY
Sycaway Bicycle Sales & Service
(518) 273-7788
13 Lord Ave
Troy, NY
Ponds & Beyond
(518) 527-9328
Albany, NY
AAA Lawn Beautician Incorporated
(518) 439-7342
14 Golder St
Albany, NY
Miller's Landscaping
(518) 381-6142
166 Cromer Ave
Schenectady, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- Framer's Guide to Engineered Lumber Latham NY
Engineered lumber does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.
- Framing Square Latham NY
- Framing Gable and Shed Dormers Latham NY
- Eliminating Swirls in Precast Panels Latham NY
- Hidden-Fastener Tool Latham NY
- How Masonry Buildings Resist Earthquakes Latham NY