Foolproof Layout Method Plans Kings Park NY

When framing walls in Kings Park, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Richard Jones Landscaping LLC
(203) 656-9684
P.O. Box 977
Darien, CT
Greg Twardy Jr. Landscape Contractors
(203) 655-1015
49 Herman Avenue
Darien, CT
Landscape Design By Lee
(631) 589-0076
Sayville Boulevard
Sayville, NY
Austin Ganim Landscape Design, Llc
203-333-2003
320 Kings Highway Cutoff
Fairfield, CT
Landscapes By Lee Itzler
631-368-8626
486 Elwood Road
East Northport, NY
Long Island landscping Ltd.
800-986-9520
36 Lincoln Ave.
Bay Shore, NY
Jordan P. Grant, Inc.
(203) 854-4949
377 Highland Avenue
Norwalk, CT
Jordan P. Grant, Inc.
(203) 854-4949
Darien, CT
Morell Landscape Associates
516-338-9095
150H School St.
westbury, NY
Hickory Landscaping
203-838-1119
5 Pogany Street
Norwalk, CT
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- Eliminating Swirls in Precast Panels Kings Park NY
What can we do to eliminate swirls in precast panels? Sid Freedman of the Precast/Prestressed Concrete Institute says such swirls are signs of segregation caused by the placing method. Read on to know more.
- Framing Gable and Shed Dormers Kings Park NY
- Framer's Guide to Engineered Lumber Kings Park NY
- How Masonry Buildings Resist Earthquakes Kings Park NY
- Framing Square Kings Park NY
- Hidden-Fastener Tool Kings Park NY