Foolproof Layout Method Plans Ithaca NY

When framing walls in Ithaca, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Ted Mc Bride Company
(607) 753-1040
1349 Fisher Ave
Cortland, NY
Windswept Tree Service
(607) 756-4475
Benny Rd
Cortland, NY
Tri County Land Maintenance
(607) 592-7901
Ithaca, NY
4 Seasons Landscaping LLC
(607) 272-1504
191 Muzzy Rd
Ithaca, NY
Level Green Landscaping, Incorporated
(607) 266-8953
1151 Ridge Rd
Lansing, NY
Warehouse Studios
(607) 758-3009
14 Dunsmore Ave
Cortland, NY
Bergeron Company
(607) 756-9918
1939 State Route 13
Cortland, NY
Get Er Done
(607) 351-1085
Ithaca, NY
Et Discount
(607) 277-7444
217 1/2 Elmira Rd
Ithaca, NY
Sbs Landscaping
(607) 266-0719
1756 Hanshaw Rd
Ithaca, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- Framing Square Ithaca NY
When someone says "framing square," we all probably think of the same object. But before it became a mass-produced tool in early 19th century America–and the tool we all think of–medieval European timber framers used framing squares to lay out bents and ribbed vaults for houses and cathedrals.
- Framing Gable and Shed Dormers Ithaca NY
- How Masonry Buildings Resist Earthquakes Ithaca NY
- Hidden-Fastener Tool Ithaca NY
- Framer's Guide to Engineered Lumber Ithaca NY
- Eliminating Swirls in Precast Panels Ithaca NY