Foolproof Layout Method Plans Holbrook NY

When framing walls in Holbrook, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Landscape Design By Lee
(631) 589-0076
Sayville Boulevard
Sayville, NY
Nason Builders
(631) 395-5662
1210 Spruce Dr
Holbrook, NY
Millennium Custom Home Builders Ltd
(631) 588-4555
2 Pearl St
Holbrook, NY
Jato Building Contractors Inc
(631) 218-4700
905 Lincoln Ave
Holbrook, NY
New York Custom Home Designs
(631) 585-1714
3 Vacation Ct
Holbrook, NY
Long Island landscping Ltd.
800-986-9520
36 Lincoln Ave.
Bay Shore, NY
Landscapes By Lee Itzler
631-368-8626
486 Elwood Road
East Northport, NY
Precision Inc
(631) 244-5771
24 Cannon Dr
Holbrook, NY
Continental Marble Technical Office
(631) 285-7265
1361 Lincoln Ave Ste 2
Holbrook, NY
East Coast Construction of Long Island Inc
(631) 256-6601
1180 Lincoln Ave Unit 7
Holbrook, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- Framer's Guide to Engineered Lumber Holbrook NY
Engineered lumber does everything solid-sawn lumber does, except better. It's stronger, lighter, straighter, and more stable. But working with I-joists and laminated veneer lumber (LVL) is different than solid-sawn lumber, so check out these tips for getting better, faster results.
- Eliminating Swirls in Precast Panels Holbrook NY
- Framing Square Holbrook NY
- Framing Gable and Shed Dormers Holbrook NY
- Hidden-Fastener Tool Holbrook NY
- How Masonry Buildings Resist Earthquakes Holbrook NY