Foolproof Layout Method Plans Garden City NY

When framing walls in Garden City, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Amber Freda Landscape Design
646-546-1592
Ny
Ny, NY
Light Scaping Concepts Inc
917-599-7139 / 917-599-7901
65-23 Claran Ct
Maspeth, NY
Sustain Landscape Design
(718) 395-3567
300 Stuyvesant Avenue
Brooklyn, NY
Lykos, Stamatios P - Lykos Stamatios P
(212) 571-2410
366 Broadway
New York, NY
Michael Acocella Urban Lndscpg
(212) 989-0342
41 Perry St
New York, NY
A Palmieri Landscaping Company, Inc
914-699-2257
6 Penn Place
Pelham Manor, NY
Landscapes By Lee Itzler
631-368-8626
486 Elwood Road
East Northport, NY
Ny Landscape Lighting
914-523-2578
245 Bronx River Road 3B
Yonkers, NY
Wallace Roberts & Todd LLC
(212) 962-1613
143 Duane St
New York, NY
Perl
(212) 327-4470
225 Broadway Rm 304
New York, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- Eliminating Swirls in Precast Panels Garden City NY
What can we do to eliminate swirls in precast panels? Sid Freedman of the Precast/Prestressed Concrete Institute says such swirls are signs of segregation caused by the placing method. Read on to know more.
- How Masonry Buildings Resist Earthquakes Garden City NY
- Framing Square Garden City NY
- Hidden-Fastener Tool Garden City NY
- Framing Gable and Shed Dormers Garden City NY
- Framer's Guide to Engineered Lumber Garden City NY