Foolproof Layout Method Plans Farmingville NY

When framing walls in Farmingville, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Landscape Design By Lee
(631) 589-0076
Sayville Boulevard
Sayville, NY
T Fitz Construction Inc
(631) 696-0034
15 Foxboro Ave
Farmingville, NY
Island Wide Setting Inc
(631) 736-6003
27 Highland Ave
Farmingville, NY
M C & Z Construction Corp
(631) 736-5260
719 Horseblock Rd
Farmingville, NY
Lakehill Homes
(631) 736-0100
779 Horseblock Rd
Farmingville, NY
Long Island landscping Ltd.
800-986-9520
36 Lincoln Ave.
Bay Shore, NY
Landscapes By Lee Itzler
631-368-8626
486 Elwood Road
East Northport, NY
Aljam Construction
(631) 451-7710

Farmingville, NY
M Jesus Construction Corp
(631) 696-7933
405 Adirondack Dr
Farmingville, NY
Concrete Courses Corp
(631) 451-1485
1075 Portion Rd
Farmingville, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- How Masonry Buildings Resist Earthquakes Farmingville NY
Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.
- Framing Gable and Shed Dormers Farmingville NY
- Eliminating Swirls in Precast Panels Farmingville NY
- Framing Square Farmingville NY
- Framer's Guide to Engineered Lumber Farmingville NY
- Hidden-Fastener Tool Farmingville NY