Foolproof Layout Method Plans Far Rockaway NY

When framing walls in Far Rockaway, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Light Scaping Concepts Inc
917-599-7139 / 917-599-7901
65-23 Claran Ct
Maspeth, NY
Urban Plantscapes
(212) 351-5094
1607 Clinton Street
Hoboken, NJ
Americas Pet Monuments
(870) 385-7006
New York, NY
Michael Acocella Urban Lndscpg
(212) 989-0342
41 Perry St
New York, NY
Spinelli Landscaping
(718) 816-6578
45 Llewellyn Pl
saintaten Island, NY
Amber Freda Landscape Design
646-546-1592
Ny
Ny, NY
Sustain Landscape Design
(718) 395-3567
300 Stuyvesant Avenue
Brooklyn, NY
Signe Nielsen Landscape
(212) 431-3609
184 Duane St Apt 2
New York, NY
Skyline Landscapes
(212) 260-8950
New York, NY
Loffreno Landscaping
(718) 448-7568
195 Granite Ave
saintaten Island, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- How Masonry Buildings Resist Earthquakes Far Rockaway NY
Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.
- Framing Square Far Rockaway NY
- Hidden-Fastener Tool Far Rockaway NY
- Eliminating Swirls in Precast Panels Far Rockaway NY
- Framing Gable and Shed Dormers Far Rockaway NY
- Framer's Guide to Engineered Lumber Far Rockaway NY