Foolproof Layout Method Plans East Setauket NY

When framing walls in East Setauket, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Landscape Design By Lee
(631) 589-0076
Sayville Boulevard
Sayville, NY
Hickory Landscaping
203-838-1119
5 Pogany Street
Norwalk, CT
M D Albert Landscape
203 813 8403
88 Wade St
Bridgeport, CT
Island Works Contracting Inc
(631) 331-7899
1 Stalker Ln
East Setauket, NY
Kns Building Restoration Inc
(718) 366-0075
5929 55th St
Maspeth, NY
Jordan P. Grant, Inc.
(203) 854-4949
377 Highland Avenue
Norwalk, CT
Austin Ganim Landscape Design, Llc
203-333-2003
320 Kings Highway Cutoff
Fairfield, CT
Landscapes By Lee Itzler
631-368-8626
486 Elwood Road
East Northport, NY
Stoney Haven Properties
(631) 689-2040
12 Technology Dr
East Setauket, NY
Jjr Assocs Inc
(631) 689-7284
100 S Jersey Ave Unit 41
East Setauket, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- Framing Square East Setauket NY
When someone says "framing square," we all probably think of the same object. But before it became a mass-produced tool in early 19th century America–and the tool we all think of–medieval European timber framers used framing squares to lay out bents and ribbed vaults for houses and cathedrals.
- Framing Gable and Shed Dormers East Setauket NY
- Eliminating Swirls in Precast Panels East Setauket NY
- How Masonry Buildings Resist Earthquakes East Setauket NY
- Framer's Guide to Engineered Lumber East Setauket NY
- Hidden-Fastener Tool East Setauket NY