Foolproof Layout Method Plans Centereach NY

When framing walls in Centereach, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right.

Local Companies

Landscape Design By Lee
(631) 589-0076
Sayville Boulevard
Sayville, NY
D and S Contracting Inc
(631) 981-8488
1723 Middle Country Rd
Centereach, NY
National Home Finders
(631) 331-8099
1515 Middle Country Rd
Centereach, NY
Grand Improvements & Construction
(631) 737-3970
15 Chatham Woods Dr
Centereach, NY
Firm Construction Company Inc the
(631) 580-0690
18 Dawn Dr
Centereach, NY
Long Island landscping Ltd.
800-986-9520
36 Lincoln Ave.
Bay Shore, NY
Landscapes By Lee Itzler
631-368-8626
486 Elwood Road
East Northport, NY
Airtech Custom Building
(631) 716-3626
167 Avondale Dr
Centereach, NY
Cal-Tran Associates Inc
(631) 588-8138
2364 Middle Country Rd
Centereach, NY
Densin Decor Inc
(631) 732-4119
80 Smithtown Polk Blvd
Centereach, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: November 1, 2003

By Steve Veroneau

Picture these scenarios: You've agonized to measure, double-check, and line up a complicated roofline, but after nailing up the rafters, you notice that the fascia lines are out of whack. Or, you've cut out all of your tair stringers, only to realize they don't fit and now you're racing rush-hour traffic to the lumberyard. Here are a few layout methods with built-in double-checks that can help solve problems before they start.

Layout Direction. When framing walls, pull all layout measurements from the same control point, and always move in the same direction, for example, start at the front of the building and always move left to right. The direction doesn't matter as long as it's the same throughout the building, including the second and third floors. Consistent layout direction ensures that studs, rafters, and joists align throughout construction. This makes life easier for installing duct work, pipes, or conduit later, leaving any bay useable as a chase throughout the structure.

Repeating Wall Patterns. Plate and detail any lined-up, same-dimension walls at the same time, so you only pull your tape once for multiple walls. For example, architects often load long hallways with closets that are usually the same size; cutting them and laying them out in one shot is easier, more accurate, and faster than laying them out as you go. It's also common to see repeating wall patter...

Click here to read full article from Tools of the Trade

Related Articles
- Framing Square Centereach NY
When someone says "framing square," we all probably think of the same object. But before it became a mass-produced tool in early 19th century America–and the tool we all think of–medieval European timber framers used framing squares to lay out bents and ribbed vaults for houses and cathedrals.
- Eliminating Swirls in Precast Panels Centereach NY
- How Masonry Buildings Resist Earthquakes Centereach NY
- Hidden-Fastener Tool Centereach NY
- Framer's Guide to Engineered Lumber Centereach NY
- Framing Gable and Shed Dormers Centereach NY