Flue Liners for Masonry Chimneys Yorktown Heights NY

Building codes require that residential masonry chimneys in Yorktown Heights with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Van Alphen Brothers Inc
(718) 981-7518
705 Van Duzer St
Staten Island, NY
Barnes Construction
(716) 665-4332
65 E Main St
Falconer, NY
William Schmidt Constr Corp
(631) 345-3550
3661 Horseblock Rd
Medford, NY
Jf Shiels Masonry Inc
(631) 589-9196
123 Joni Dr W
Sayville, NY
Bosco & Sons Mason Contracting
(631) 385-9107
1036 Park Ave
Huntington, NY
Antrim Masonry Corp
(212) 921-4001
15 Park Row
New York, NY
A Leto Asphalt & Consulting
(518) 887-5569

Rotterdam Junction, NY
Iovino Mason Contractor
(516) 334-4636
50 Swalm St
Westbury, NY
Jovial Constr
(631) 277-2842
193 Islip Ave
Islip, NY
Horan Michael P Masonary Inc
(315) 266-0620
777 Broad St
Frankfort, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction