Flue Liners for Masonry Chimneys Spring Valley NY

Building codes require that residential masonry chimneys in Spring Valley with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

park place pavers
(914)667-1735
255 rich ave
mount vernon, NY
Zabriskie Cornelius Neal
(845) 386-1393
36 Valley View Rd
Otisville, NY
Daponte Constr Corp
(631) 475-3975
17 Sylvan Dr
Holtsville, NY
Walters & Lambert Mason Contractors Inc
(845) 266-4758
323 Hibernia Rd
Salt Point, NY
Hill Josef Masonry
(845) 638-6964
8 Acorn Ter
New City, NY
K B Masonry LLC
(973) 831-0018
58 Townsend Road
Wanaque, NJ
Delcolle John Inc
(631) 423-6383
11 Cager Pl
Huntington Station, NY
Geneva Curb & Concrete Co Inc
(315) 781-1710
64 Seneca St
Geneva, NY
Hudson Masonry
(845) 343-4508

Middletown, NY
Angelo's Construction
(914) 669-5581
16 Guinea Rd
Brewster, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles