Flue Liners for Masonry Chimneys Saugerties NY

Building codes require that residential masonry chimneys in Saugerties with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Apollo Restoration Inc
(718) 727-2246
197 Fillmore Ave
Staten Island, NY
Transcorp Construction Corp
(718) 639-3000
7416 Grand Ave
Elmhurst, NY
Gamb's Cement & Masonry Work
(631) 226-2907
269 Cortland St
Lindenhurst, NY
Catenary Constr
(585) 454-4140
112 Hudson Ave
Rochester, NY
M-N-M Contractors
(914) 736-1546
2 John Walsh Blvd
Peekskill, NY
Darcom Inc
(516) 872-3798
49 Dubois Ave
Valley Stream, NY
Mike Ryan Construction Co
(607) 756-0401
109 South St
Elbridge, NY
T & A Construction Inc
(516) 921-2152
74 Hillside Ln
Syosset, NY
Metro G C
(718) 445-3604
14948 22nd Ave
Flushing, NY
Daly & Zilch Mason Contractors Inc
(716) 877-3274
26 Arthur St
Buffalo, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction