Flue Liners for Masonry Chimneys Rye NY

Building codes require that residential masonry chimneys in Rye with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Cotumaccio Luigi Masonry Contrctng Co
(718) 776-2661
9071 198th St
Jamaica, NY
Bosco & Sons Mason Contracting
(631) 385-9107
1036 Park Ave
Huntington, NY
Fort Hill Landscape And Design Inc
(631) 271-8651
151 New York Ave
Huntington, NY
Peter Home Improvements Corp
(718) 699-8441
5841 Waldron St
Flushing, NY
park place pavers
(914)667-1735
255 rich ave
mount vernon, NY
Begolli Brother Construction and Restoration
(516) 476-6166
134 maple avenue
westbury, NY
Agl Land Design Inc
(631) 673-2854
19 Duncan Ln
Huntington, NY
Capstone Construction
(631) 784-7701
775 Park Ave
Huntington, NY
Anastasio Inc
(631) 499-1777
1633 E Jericho Tpke
Huntington, NY
Academic Stone Setters Inc
(718) 463-7395
2907 119th St
Flushing, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles
- Flashing at Sills Rye NY
Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.
- Galvanized Wall Ties Rye NY
- Improving Company Loyalty Rye NY
- Inner Corner at Base of Wall Rye NY
- Flashing Factors Rye NY
- How Masonry Buildings Resist Earthquakes Rye NY
- Galvanized Wall Ties Rye NY
- High Cement Content Problems Rye NY
- Grout Pumps Rye NY
- Hand-Held Power Saws Rye NY