Flue Liners for Masonry Chimneys Rome NY

Building codes require that residential masonry chimneys in Rome with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Trulys Contracting Corp
(631) 218-8238
186 Locust Ave
Oakdale, NY
Syrbescapes
(631) 361-6978
246 Alexander Ave
Nesconset, NY
Emerald Isle Masonry
(631) 218-2510
980 Montauk Hwy
Oakdale, NY
Dap Masonry Inc
(516) 409-0530
1907 Bellmore Ave
North Bellmore, NY
Peregrine Contracting Co Inc
(516) 249-4939
1113 N Broadway
North Massapequa, NY
Mid Island Masonary
(631) 969-9724
1 Avon Pl
Bay Shore, NY
Atm
(631) 476-4332
Route 25A
Port Jefferson Station, NY
Mr B Home Repairs
(718) 206-4900
10640 Guy R Brewer Blvd
Jamaica, NY
Mayo Masonry
(607) 565-3683
21 Gail Dr
Waverly, NY
Scaping by Fiorino & Olivia Inc
(914) 381-1954
436 Halstead Ave
Mamaroneck, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles
- Galvanized Wall Ties Rome NY
Do wall ties need to be galvanized in solid masonry walls? The steel used in concrete is typically not coated. Wouldn't solid masonry offer protection similar to that offered by concrete?
- Flashing at Sills Rome NY
- Hand-Held Power Saws Rome NY
- High Cement Content Problems Rome NY
- Flashing Factors Rome NY
- Improving Company Loyalty Rome NY
- Inner Corner at Base of Wall Rome NY
- Grout Pumps Rome NY
- How Masonry Buildings Resist Earthquakes Rome NY
- Galvanized Wall Ties Rome NY