Flue Liners for Masonry Chimneys Rockaway Park NY

Building codes require that residential masonry chimneys in Rockaway Park with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Willow Run Construction
(201) 659-7266
67 Pollock Ave
Jersey City, NJ
Villa Stucco
(201) 653-9447
54 Jefferson Ave
Jersey City, NJ
Mr B Home Repairs
(718) 206-4900
10640 Guy R Brewer Blvd
Jamaica, NY
Cotumaccio Luigi Masonry Contrctng Co
(718) 776-2661
9071 198th St
Jamaica, NY
Academic Stone Setters Inc
(718) 463-7395
2907 119th St
Flushing, NY
E C Hufnagel Landscaping Inc
(201) 869-5680
51 Broad Ave Apt 1
Fairview, NJ
Samson Stone Co Inc
(201) 656-2417
1000 Newark Ave
Jersey City, NJ
Jameson Mark
(201) 386-1500
Hoboken Area
Jersey City, NJ
Alpha Design Corp
(718) 291-5023
17605 Linden Blvd
Jamaica, NY
Pezzino Nely
(718) 358-1481
2221 Parsons Blvd
Flushing, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction