Flue Liners for Masonry Chimneys Riverhead NY

Building codes require that residential masonry chimneys in Riverhead with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Kjm Construction of Albany
(518) 862-2085

Albany, NY
W R A Construction
(845) 586-3961
2884 E Hubbell Hill Rd
Margaretville, NY
Cadin Contrctng Corp
(631) 420-1730
1835 Walt Whitman Rd
Melville, NY
Hardrock Masonry
(631) 874-8395

Center Moriches, NY
Northeastern Chimney & Stove
(518) 370-7139

Schenectady, NY
Ace Concrete Co
(631) 728-5419
276 W Montauk Hwy
Hampton Bays, NY
Mangone Mason Contractors
(516) 997-0927
251 Post Ave
Westbury, NY
Brunjes Blacktop
(516) 354-5554
150 New Hyde Park Rd
Franklin Square, NY
Chirico Masonry
(845) 265-4877
119 Perks Blvd
Cold Spring, NY
Heritage Masonry Restoration
(315) 423-9889
421 Burnet Ave
Syracuse, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles
- Flashing at Sills Riverhead NY
Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.
- Galvanized Wall Ties Riverhead NY
- High Cement Content Problems Riverhead NY
- Grout Pumps Riverhead NY
- Flashing Factors Riverhead NY
- Galvanized Wall Ties Riverhead NY
- How Masonry Buildings Resist Earthquakes Riverhead NY
- Hand-Held Power Saws Riverhead NY
- Inner Corner at Base of Wall Riverhead NY
- Improving Company Loyalty Riverhead NY