Flue Liners for Masonry Chimneys Penfield NY

Building codes require that residential masonry chimneys in Penfield with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Zamboli Mason Inc
(631) 395-1900
581 Mastic Rd
Mastic, NY
Kelly Masonry Corp
(516) 739-8110
366 Sagamore Ave
Mineola, NY
Cobble King Inc
(631) 924-6202
530 North St
Manorville, NY
United Masonry Corp
(516) 799-0555
5648 Old Sunrise Hwy
Massapequa, NY
Mike's Masonry & Concrete
(914) 245-1811
1076 Spillway Rd
Shrub Oak, NY
ADS Masonry
585-698-0756
1900 university ave
rochester, NY
25 Mason Inc
(718) 832-2388
121 25th St
Brooklyn, NY
A & J Masonry Construction Corp
(718) 845-4507
9408 Albert Rd
Jamaica, NY
Henry Devries Inc
(845) 342-2148
558 County Route 49
Middletown, NY
Belton Masonry
(518) 399-0675
47 Ashdown Rd
Ballston Lake, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles
- Flashing at Sills Penfield NY
Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.
- Hand-Held Power Saws Penfield NY
- How Masonry Buildings Resist Earthquakes Penfield NY
- Galvanized Wall Ties Penfield NY
- Flashing Factors Penfield NY
- Improving Company Loyalty Penfield NY
- Inner Corner at Base of Wall Penfield NY
- Grout Pumps Penfield NY
- Galvanized Wall Ties Penfield NY
- High Cement Content Problems Penfield NY